PPG Coraflon® Platinum FEVE Powder Coatings – The Next-Generation Finish ASUZAC ACM Uses for Superior Single-Coat Architectural Protection
When ASUZAC ACM needs a coating that combines extreme durability, stunning aesthetics, eco-friendly formulation, and maximum production efficiency on complex cast aluminum architecture, we turn to the newest breakthrough from PPG:
Coraflon® Platinum – the world’s first single-coat FEVE fluoropolymer powder coating that exceeds AAMA 2605 and outperforms every previous FEVE powder on the market.
Launched in 2021, Coraflon® Platinum represents a true leap forward in powder technology. It delivers 20% higher transfer efficiency, broader gloss range (5–85), true anodized-look finishes, and superior corrosion protection – all in a single coat that is fully reclaimable and formulated without VOCs, HAPS, BPA, TGIC, or PFOA.
This is why Coraflon® Platinum has rapidly become the powder coating of choice on ASUZAC ACM’s most demanding exterior projects across Japan and Southeast Asia.
Table of Contents
Why ASUZAC ACM Upgraded to Coraflon® Platinum
Advantage | Coraflon® Platinum | Standard FEVE Powder |
Number of Coats Required | Single coat | Usually 1–2 coats |
Transfer Efficiency | Up to 20% higher | Standard |
Gloss Range (@60°) | 5–85 (matte to high gloss) | 25–70 |
Anodized-look Finish | Available in true anodized effects | Not possible |
Reclaimability | 100% reclaimable, minimal waste | Lower reclaim rates |
Environmental Profile | Zero VOCs, HAPS, BPA, TGIC, PFOA | May contain some restricted substances |
Corrosion Protection (AAMA 2605 cyclic) | Outstanding single-coat performance | Requires thicker film or second coat |
Technical Performance – AAMA 2605 Proven
Property | Test Method | Coraflon® Platinum Result |
Dry Adhesion | ASTM D3359 | 5B – no removal |
Wet & Boiling Water Adhesion | ASTM D3359 | 5B – no removal |
Pencil Hardness | ASTM D3363 | F minimum |
Direct Impact Resistance | ASTM D2794 | 3 mm deformation, no removal |
Cyclic Corrosion (4,000 hrs) | ASTM G85 Annex A5 | Pass – Blister ≥8, Scribe ≥7 |
Humidity Resistance (4,000 hrs) | ASTM D2247 | Pass – Blister ≥8 |
South Florida Exposure 10 years | ASTM D2244 / D4214 | ≤5% fade, ≤8 chalk |
Recommended Film Thickness | ASTM D1400 | 2.0–3.0 mils (50–76 μm) |
Gloss Range | ASTM D523 | 5–85 @60°, 5–100 @85° |
Tested on E-CLPS 2101 non-chrome pretreatment over 6063 alloy (the same pretreatment system used at ASUZAC ACM).
Aesthetic Freedom Never Before Possible with FEVE Powder
Coraflon® Platinum finally closes the gap between liquid 70% PVDF and powder coatings:
- True anodized-look finishes (silver, bronze, black) with the durability of FEVE
- Deep matte (as low as 5 gloss) to ultra-high gloss (85+)
- Full range of metallic, mica, textured, and special-effect colors
- Perfect color uniformity on complex castings and deep recesses
This is revolutionary for cast aluminum architecture where intricate details and shadow lines demand flawless coverage in a single pass.
Production & Sustainability Advantages at ASUZAC ACM
- Higher First-Pass Transfer Efficiency
Up to 20% less overspray → significant powder savings on large projects. - 100% Reclaimable
Virtually zero waste – reclaimed powder performs identically to virgin material. - Faster Line Speed
Excellent flow and hiding in a single 2.0–3.0 mil coat → increased throughput. - Cleaner Formulation
Free of VOCs, HAPS, BPA, TGIC, and PFOA → meets the strictest global environmental regulations and LEED v4.1 credits.
Perfect for V-Process Castings
Our ultra-smooth, porosity-free V-Process surfaces combined with Coraflon® Platinum deliver mirror-like finishes even on the most complex geometries.
Signature ASUZAC ACM Projects Finished with Coraflon® Platinum
Since 2022, Coraflon® Platinum has been specified on:
- New-generation university facade panels (Japan) – matte black anodized look
- Luxury coastal villa gates (Vietnam & Indonesia) – champagne metallic single-coat
- High-end retail & office building decorative elements – ultra-low gloss textured finishes
- Modern pagoda and temple restoration projects – custom bronze and gold effects
All projects benefit from the same 10-year Florida exposure guarantee and PPG warranty backing.
Ready for the Future of Architectural Powder Coating?
When your project demands the most advanced, sustainable, and beautiful single-coat finish available today – specify the system trusted by Japan’s most demanding architects:
ASUZAC ACM precision cast aluminum + PPG Coraflon® Platinum FEVE powder coatings
Contact our technical team for:
- Physical color samples & anodized-look panels
- AAMA 2605 test reports
- Project-specific color matching
- LEED documentation
Phone: +84-937-076-608
Email: [email protected]
Request samples / quotation: Contact Us
Learn about our casting technology: V-Process Technology
Coraflon® Platinum isn’t just the next generation of FEVE powder – it’s the new benchmark for architectural excellence.
